+86-180-6173-5202
| WB1KL | 500 | 1200 | R650 |
| Specification series | Payload | Total length of beam | Flip radius |
| 500KG | 1200mm | 650mm | |
| 1000KG | 1800mm | 850mm | |
| 1500KG | 2500mm | 1050mm | |
| 3000mm | |||
| 3500mm | |||
| 4000mm |
| Rated load: | 500KG | 1000KG | 1500KG |
| Number of axes: | Single-axis single-drive | ||
| Recommended motor power and torque: | 2KW/9.5nm | 3KW/14.5nm | 4.3KW/22n.m |
| Gearbox model: | 40E (frame3000 and above 80E) | 110E (frame 3000 and above 160E) | 160E |
| Overall reduction ratio: | 153:1 | 175.28:1 | 171:1 |
| Rated output speed: | 78 °/sec | 68 °/sec | 70 °/sec |
| Maximum output speed: | 117 °/sec | 102 °/sec | 105 °/sec |
| Rated output torque: | 1150 N.M | 2000N.M | 3000 N.M |
| Allowable eccentricity: | ≤150mm | ||
| Repeatability: | ±0.02mm (R500)Measurement) | ||
| Motor mounting flange: | 130flange/axis22mm/key8mm | 130flange/axis22mm/key8mm & 180flange/axis35m/key10mm | |
| Flip180°Time taken: | 2.5 seconds | 3.0 sec | 3.0 sec |
| Flipping motion range: | ±360° | ||
| Crossbeam specifications: | 100*200Thickened/Tempering to relieve stress | ||
| Column material: | Horizontal machining/Ultra-high coaxiality | ||
| Conductivity: | Standard configuration 70mm² Flexible and high-temperature resistant tin-plated wire direct connection(350A) /Optional 500A for 140mm²/ Durable, non-burning motor with stable welding | ||
| Driven shaft type: | Patented double roller bearing+Cast steel flange(warranty 10 Years) ,Hollow out(Anti-wear line design) | ||
| Standard colors: | (Phosphating/Sand blasting/Powder coating )Standard configuration: Main body RAL7035/frameRAL1018/RAL2004 | ||
Note: The speed reducer should be increased according to the length and width of the frame. Upgrade the motor model, selecting one with near-maximum torque. If the eccentricity is large, both the reducer and the motor need to be upgraded. Column selection. Cast or welded plates. Special motor interface manufacturers provide adapters. 500A Please inform us of the need for additional lead wires during welding. Custom sizes are available for sizes other than standard. Welding columns are available for non-standard radii. One lead wire is standard.RVspeed reducer(Prices for designated brands are negotiable.). | |||
English
Russian
