+86-180-6173-5202
| WB1KK | 500 | 1600 | R650 |
| Specification series | Payload | Pin spacing | Turning radius |
| 500KG | 1600mm | 650mm | |
| 1000KG | 2000mm | 850mm | |
| 1500KG | 2500mm | 1050mm | |
| 3000mm |
| Rated load: | 500KG | 1000KG | 1500KG |
| Number of axes: | Single-axis single-drive quick change | ||
| Recommended motor power and torque: | 2KW/9.5nm | 3KW/14.5nm | 4.3KW/22n.m |
| Gearbox model: | 40E (80E for frames 3000 and above) | 110E (160E for frames 3000 and above) | 160E |
| Overall reduction ratio: | 153:1 | 175.28:1 | 171:1 |
| Rated output speed: | 78°/sec | 68°/sec | 70°/sec |
| Maximum output speed: | 117°/sec | 102°/sec | 105°/sec |
| Rated output torque: | 1150 N.M | 2000N.M | 3000 N.M |
| Allowable eccentricity: | ≤150mm | ||
| Repeatability: | ±0.02mm (measured at R500) | ||
| Motor mounting flange: | 130 flange/shaft 22mm/key 8mm | 130 flange/shaft 22mm/key 8mm & 180 flange/shaft 35mm/key 10mm | |
| Time taken to flip 180°: | 2.5 seconds | 3.0 sec | 3.0 sec |
| Flipping motion range: | ±360° | ||
| Frame specifications: | Customer-supplied fixture plate, positioner with quick-change port (standard configuration includes active side pin + driven side positioning slot). | ||
| Column material: | Horizontal machining/Ultra-high coaxiality | ||
| Conductivity: | Standard configuration: 70m² flexible and high-temperature resistant direct connection (at 350A) Optional configuration: 500A for 140m² Durable, won't burn out, stable welding replacement | ||
| Driven shaft type: | High-precision rotary support, hollow cable outlet (anti-wear cable design). | ||
| Standard colors: | (Phosphating/Sandblasting/Powder Coating) Standard Configuration: Body RAL7035/Sheet Metal RAL2004 | ||
Notes: Upgrades will be made according to the frame length and width, increasing the size of the reducer/motor model accordingly. Motor selection will be based on approximate torque; for larger eccentricities,both the reducer and motor need to be upgraded. Cast or welded plates are available for the columns. Special motor interfaces include adapters. Please inform us of the need for additional wiring when using a 500A welding machine. (Sheet metal colors are free to customize; custom colors and lead times for other parts are negotiable). Custom sizes are available for sizes other than standard. Welded columns are available for non-standard radii. Standard configuration includes a high-quality RV reducer (prices for specific brands are negotiable). | |||
English
Russian
